IoT project, internet of things initiative, connected device deployment, smart system project, sensor network rollout
Customer Service Hotline：
+8613261677119
IoT project, internet of things initiative, connected device deployment, smart system project, sensor network rollout+8613261677119
Fire protection is at a critical inflection point. For decades, Halon 1301 was the gold standard for protecting high-value assets — data centers, museums, archives, telecommunication facilities, and industrial control rooms — where water-based fire protection (sprinklers) would cause unacceptable collateral damage. Halon was extraordinarily effective, but its environmental cost was catastrophic: Halon 1301 has an Ozone Depletion Potential (ODP) of 10, and under the Montreal Protocol, production was banned in 1994. The first generation of Halon replacements — HFC-based agents like FM-200 (HFC-227ea) — solved the ozone problem (ODP=0) but introduced a new one: global warming. FM-200 has a Global Warming Potential (GWP) of 3,220 — 3,220 times more potent as a greenhouse gas than CO2. Now, under the Kigali Amendment to the Montreal Protocol, HFCs are being phased down globally, with the EU F-Gas Regulation already restricting HFC use in new fire protection systems.
FK-5-1-12 (perfluorohexanone, C6F12O, chemically equivalent to 3M Novec 1230) is the breakthrough solution. It combines effective fire suppression with negligible environmental impact: GWP=1 (essentially climate neutral — 3,200x lower than FM-200), ODP=0, and atmospheric lifetime of approximately 5 days (vs. 34 years for FM-200). FK-5-1-12 is safe for occupied spaces (NOAEL=10% vs. typical design concentration of 4.2-5.9% — a 1.7x safety margin), electrically non-conductive, leaves zero residue, and extinguishes fires in seconds through heat absorption — protecting both lives and assets. As the global clean agent fire suppression market grows at 15-20% CAGR, driven by the HFC phase-down, data center expansion, and battery energy storage deployment, FK-5-1-12 is emerging as the preferred clean agent for the next generation of fire protection.
The Clean Agent System Installation from Wanlin Fire Control is purpose-engineered for this market transformation — a UL/FM/CE/VdS certified FK-5-1-12 fire suppression system manufactured by an ISO9001:2015 certified factory, with complete international certification documentation. As a direct manufacturer, Wanlin provides factory-direct pricing and OEM flexibility that enables distributors to build their own competitive fire suppression brand.
Clean Agent System Installation — FK-5-1-12 Perfluorohexanone Clean Agent Fire Suppression by Wanlin Fire Control
Product Name: Clean Agent System Installation
Brand: Wanlin Fire Control — Perfluorohexanone Clean Agent Fire Suppression Series
Product Category: Clean Agent Fire Suppression System / FK-5-1-12 Gas Fire Extinguishing Equipment / Perfluorohexanone (Novec 1230 Equivalent) Fire Protection System
Manufacturer: Wanlin Fire Control — ISO9001:2015 certified fire safety equipment factory, direct manufacturer and exporter of FK-5-1-12 / perfluorohexanone clean agent fire suppression systems
Fire Extinguishing Agent: FK-5-1-12 (Perfluorohexanone, chemical formula C6F12O) — also known as perfluoroketone, Novec 1230 equivalent. This clean agent is a fluorinated ketone that extinguishes fires primarily through heat absorption (physical mechanism) — the agent absorbs heat from the flame at a molecular level, reducing the flame temperature below the point where combustion can be sustained. Key properties: (1) Chemical formula: C6F12O (dodecafluoro-2-methylpentan-3-one), (2) Molecular weight: 316.04 g/mol, (3) Boiling point: 49.2 deg C (at 1 atm — a liquid at room temperature under its own vapor pressure), (4) Liquid density: 1.60 g/mL at 20 deg C, (5) Ozone Depletion Potential (ODP): 0 (contains no chlorine or bromine — does not deplete the ozone layer), (6) Global Warming Potential (GWP): 1 (over 100-year time horizon — essentially climate neutral, 3,200x lower than HFC-227ea which has GWP=3,220, 6,500x lower than HFC-23 which has GWP=14,800), (7) Atmospheric lifetime: approximately 5 days (the agent photolyzes rapidly in the troposphere — negligible accumulation in the atmosphere), (8) No Observable Adverse Effect Level (NOAEL): 10% by volume — the agent is safe for occupied spaces at design concentrations (typically 4.2-5.9% for Class A fires), and (9) Lowest Observable Adverse Effect Level (LOAEL): >10% — the safety margin between the design concentration and the NOAEL is substantial, making FK-5-1-12 one of the safest clean agents for occupied spaces. The agent is stored as a liquid in pressurized cylinders (typically at 25 bar or 42 bar nitrogen super-pressurization). Upon discharge, the liquid agent exits the nozzle as a fine aerosol mist that rapidly vaporizes in the protected space — the phase change from liquid to gas absorbs heat, while the gaseous agent distributes uniformly throughout the enclosure to extinguish the fire at all locations simultaneously. The total flooding design achieves extinguishment typically within 10 seconds of discharge initiation, per NFPA 2001 and ISO 14520 requirements.
Sustainability & Regulatory Compliance: The Clean Agent System Installation uses FK-5-1-12 — a clean agent that meets the most demanding environmental regulations worldwide. Unlike HFC-based agents (FM-200/HFC-227ea, HFC-23, HFC-125) that face an uncertain regulatory future under the Kigali Amendment's global HFC phase-down, FK-5-1-12 has GWP=1 and is exempt from HFC phase-down schedules. For data center operators, telecom companies, museums, and other organizations with carbon neutrality commitments, choosing FK-5-1-12 aligns fire safety with sustainability goals. The agent's negligible environmental impact also simplifies regulatory compliance: no F-Gas quota management (EU), no HFC usage reporting, no carbon tax liability, and full compliance with green building certification requirements (LEED v4.1, BREEAM, DGNB). Many Wanlin customers have reported that FK-5-1-12's environmental credentials were a deciding factor in project approval — particularly for government-funded projects, ESG-focused corporations, and organizations with published carbon reduction targets.
System Type: The Clean Agent System Installation is a fixed, automatic FK-5-1-12 fire suppression system — permanently installed in the protected enclosure, continuously monitoring for fire, and automatically discharging the extinguishing agent when fire is detected. The system is a total flooding type per NFPA 2001 / ISO 14520: the extinguishing agent is discharged into the entire enclosed volume to achieve a uniform design concentration that extinguishes the fire throughout the space simultaneously. The system components include: (1) Agent storage cylinder(s) — steel cylinders (seamless, DOT/TPED/PED certified) containing FK-5-1-12 agent super-pressurized with dry nitrogen to 25 bar or 42 bar at 20 deg C. Cylinders include: cylinder valve with pneumatic or electric actuator, pressure gauge with low-pressure supervisory switch, liquid level indicator or weigh scale for agent quantity verification, and safety relief device (burst disc) for over-pressure protection. (2) Discharge piping and nozzles — designed by hydraulic calculation to deliver the agent to all areas of the protected space within the required 10-second discharge time. (3) Fire detection and control — smoke detectors, heat detectors, or flame detectors connected to the fire alarm control panel, which processes detection signals, activates alarms, initiates the time delay, and triggers agent discharge. (4) Manual release and abort — a manual release station (break-glass type) for manual activation, and an abort switch for occupied spaces (pressing and holding the abort switch during the pre-discharge time delay prevents discharge — releasing the switch restarts the delay). (5) Alarm and notification — audible and visual alarms inside and outside the protected space: pre-discharge alarm (distinctive sound to warn occupants to evacuate), discharge alarm (indicates agent has been released — do not enter), and system status indicators (normal, alarm, fault, discharged). The system is designed per NFPA 2001 (Clean Agent Fire Extinguishing Systems) or ISO 14520 (Gaseous Fire-Extinguishing Systems) by certified fire protection engineers including: enclosure integrity verification (door fan test to measure leakage and ensure the agent concentration is maintained for the required hold time — typically 10 minutes), hydraulic calculation (pipe sizing, nozzle selection, and orifice sizing to achieve balanced flow within the discharge time), and structural analysis (verifying the enclosure can withstand the pressure increase during agent discharge — typically 100-500 Pa overpressure).
Sizing & Design: The Clean Agent System Installation is sized according to the protected volume and fire hazard classification per NFPA 2001 / ISO 14520. The design process: Step 1 — determine the protected volume (net volume after deducting fixed, impermeable structures). Step 2 — identify the fire hazard (Class A for typical office/server room/archive, Class B for flammable liquid storage/processing). Step 3 — determine the minimum design concentration per the standard (typically 4.2-5.9% for Class A, higher for Class B). Step 4 — calculate the minimum agent quantity using the formula in NFPA 2001: W = (V/S) * (C/(100-C)) where W = agent mass (kg), V = net protected volume (m3), S = specific volume of superheated agent vapor (m3/kg at the minimum protected space temperature and at 1.013 bar), and C = design concentration (%). Step 5 — apply safety factors: additional agent for leakage (determined by enclosure integrity door fan test — the required hold time is typically 10 minutes, and the agent quantity must be sufficient to maintain the design concentration for this hold time despite enclosure leakage), and temperature and altitude corrections. Step 6 — select the appropriate cylinder size and number of cylinders based on the calculated agent quantity. Wanlin provides complete system design service: you provide the room dimensions and fire hazard description, and our engineers deliver the full system design package within 3-5 business days.
Discharge Performance: Per NFPA 2001, the FK-5-1-12 system must discharge a minimum of 95% of the agent mass within 10 seconds of initiating discharge. The Clean Agent System Installation is engineered to achieve this discharge time through: (1) Super-pressurization with dry nitrogen — the agent cylinder is pressurized to 25 bar (standard) or 42 bar (for longer pipe runs or higher flow requirements). The nitrogen provides the driving force to expel the liquid agent through the piping and nozzles within the required time. (2) Hydraulic calculation — the pipe network is designed so that the flow to each nozzle is balanced. The pipe sizes are selected to minimize pressure drop while maintaining sufficient velocity for liquid agent transport (too low velocity = agent pools in low spots, too high velocity = excessive pressure drop). (3) Nozzle design — the discharge nozzles are designed to atomize the liquid FK-5-1-12 into a fine aerosol mist. Atomization is critical: larger droplets fall to the floor and do not vaporize effectively, while overly fine droplets may be carried out of the enclosure by air currents. The nozzle orifice size and spray pattern are selected to produce droplets in the 50-200 micron range — optimal for rapid vaporization and uniform distribution. (4) Hold time — after discharge, the FK-5-1-12 vapor must maintain the design concentration in the enclosure for a minimum of 10 minutes (the 'hold time' per NFPA 2001). This prevents fire re-ignition and allows time for the fire department to arrive. The enclosure must be sufficiently tight — the door fan test (blower door test) quantifies the leakage area, and the hydraulic calculation includes an agent quantity margin to compensate for leakage during the hold time. After the hold time, the agent naturally disperses: FK-5-1-12 has an atmospheric lifetime of approximately 5 days — it photolyzes in the lower atmosphere and does not accumulate.
Fire Detection & Actuation: The fire detection strategy for the Clean Agent System Installation is designed for reliable fire detection with zero false discharges: Primary detection method — cross-zoned smoke detection. Two independent smoke detector zones cover the protected area. Both zones must detect smoke to initiate the discharge sequence. This dual-confirmation logic is the industry standard for clean agent systems (required by many insurance underwriters and fire authorities) because it virtually eliminates false discharges — the probability of two independent smoke detectors false-alarming simultaneously from a non-fire source is extremely low. In practice, over the millions of clean agent systems installed globally, the cross-zoned detection approach has proven to be the most reliable method for preventing accidental agent discharge while ensuring rapid response to real fires. The detection zones are arranged so that a real fire (which generates smoke that spreads throughout the room) will activate detectors in both zones within seconds of each other — typically within 10-30 seconds of fire initiation. Detection alternatives: for environments where smoke detection is challenging (dusty industrial environments, high-airflow areas): heat detection (rate-of-rise + fixed temperature), or flame detection (UV/IR for fast-flaming fires in open areas). For high-sensitivity applications (data centers, cleanrooms): aspirating smoke detection (VESDA/HSSD) — continuously draws air samples from the protected space through a pipe network to a central high-sensitivity laser detector, detecting smoke at concentrations far below visible levels. Actuation methods — the system can be actuated by: (1) Automatic — the detection panel triggers discharge after the pre-discharge time delay (no human intervention required). (2) Manual electric — pressing the manual release station (break-glass type) immediately initiates the discharge sequence (bypasses the detection confirmation but NOT the time delay — the time delay still counts down to allow evacuation). (3) Manual mechanical — pulling the manual actuator lever on the cylinder valve directly opens the valve (bypasses all electrical controls — used as a last resort if the electrical control system has failed). (4) Remote — the system can be triggered remotely via the building management system, the central monitoring station, or (for unmanned facilities) a remote operator viewing the CCTV feed.
Safety & Occupied Space Protection: FK-5-1-12 is one of the safest clean agents available for occupied space protection. The key safety parameter is the safety margin — the difference between the design concentration (the concentration needed to extinguish the fire) and the concentration at which adverse health effects could occur: (1) NOAEL (No Observable Adverse Effect Level) = 10% by volume — at this concentration, human volunteers showed no observable adverse effects in cardiac sensitization testing (the most sensitive health endpoint for halocarbon agents — cardiac arrhythmia when the heart is sensitized by adrenaline and exposed to the agent). (2) Design concentration for typical Class A fire (worst case) = approximately 5.9% by volume (with safety factor). (3) Safety margin = 10% / 5.9% = approximately 1.7x — the agent concentration in the enclosure after discharge is roughly 60% of the NOAEL. This safety margin allows for: some non-uniform distribution (the concentration near the ceiling may be slightly higher than at the floor — but the average concentration is well below the NOAEL), delayed evacuation (a person who does not evacuate immediately is not exposed to harmful concentrations), and system design margin (the actual concentration may be slightly higher than the minimum design concentration due to cylinder fill tolerance). (4) Risk assessment: even at the worst-case local concentration, FK-5-1-12 does not cause cardiac sensitization, does not deplete oxygen (the agent does not displace oxygen — the enclosure oxygen level remains normal), and does not produce toxic decomposition products at fire-suppression concentrations (the thermal decomposition products of FK-5-1-12 — primarily hydrogen fluoride, HF — are only produced at temperatures above 500 deg C, which occur only in the immediate vicinity of the flame. The total quantity of HF produced during extinguishment of a typical fire is well below hazardous levels and dissipates rapidly after extinguishment). (5) Post-discharge re-entry: after the fire is extinguished, the enclosure is ventilated for 30-60 minutes. The FK-5-1-12 concentration rapidly decreases toward zero. Because FK-5-1-12 is non-toxic at fire suppression concentrations, re-entry for emergency purposes (firefighter entry in breathing apparatus) is possible immediately after discharge. (6) Environmental safety: FK-5-1-12 has zero ODP and GWP=1 — it does not harm the environment. The agent does not accumulate in the atmosphere (5-day atmospheric lifetime) and does not pose a long-term environmental risk.
Certification: FM Approved per FM 5600 / UL Listed per UL 2166 & UL 2129 / CE Marked (PED 2014/68/EU, CPR) / VdS Approved (Germany — VdS 2380, VdS 2381, VdS 2493) / LPCB Approved (UK — LPS 1204, LPS 1230) / EN 15004 / EN 12094 / NFPA 2001 / ISO 14520 / IMO MSC/Circ.848 / DNV Type Approved / ATEX / IECEx / MED (Marine Equipment Directive) / RoHS / REACH — comprehensive European and international fire suppression system certification with full compliance documentation for all major markets
Compliance Standards: NFPA 2001 (Standard on Clean Agent Fire Extinguishing Systems — US), ISO 14520 (Gaseous Fire-Extinguishing Systems — International), EN 15004 (Fixed Firefighting Systems — Gas Extinguishing Systems — EU), EN 12094 (Components for Gas Extinguishing Systems — EU), UL 2166 (Halocarbon Clean Agent Extinguishing System Units), UL 2129 (Halocarbon Clean Agent Fire Extinguishers), FM 5600 (Clean Agent Extinguishing Systems), IMO MSC/Circ.848 (Marine Applications), AS 4214 (Gaseous Fire-Extinguishing Systems — Australia), GB 25972 (Gas Fire Extinguishing Systems — China). Full certification documentation provided for customs clearance and local regulatory approval in your target market.
Minimum Order Quantity (MOQ): 50 units for OEM/custom branding
Production Lead Time: 5-10 business days for portable/wheeled extinguishers (stock)
Sample Policy: Samples/ evaluation units accepted — pay sample cost + shipping, credited against first bulk order. Portable extinguisher samples shipped within 3-5 business days via DHL/FedEx/UPS. Cabinet-type system samples shipped within 7-10 business days via air freight. Full engineering design service provided for sample evaluation of piping network systems.
Customization Options: Custom system configuration (cylinder size, nozzle type, control panel features), custom branding/logo on cylinders, control panels, and extinguishers, custom RAL color for cabinets and enclosures, custom packaging (industrial, retail, project-specific), custom language control panel interface (English standard, 20+ languages available), private label / white label manufacturing (your brand on certified fire suppression systems), custom engineering design for unique enclosures, and API/SDK for integration with your building management or monitoring platform. MOQ applies for customization — contact our export team for details.
Intended Use / Applications: Data centers and server rooms, telecommunication facilities and network rooms, electrical switchgear and UPS rooms, energy storage systems and battery rooms, museums, archives, and libraries (water-sensitive assets), hospitals and healthcare facilities, laboratories and cleanrooms, industrial control rooms and process areas, power generation (substations, generator rooms, wind turbine nacelles), marine engine rooms and machinery spaces, oil and gas facilities (control rooms, electrical buildings), transportation (rail, aviation, marine), commercial buildings (IT rooms, electrical rooms, valuable asset protection), and any enclosure containing high-value, water-sensitive, or business-critical assets where water-based fire protection (sprinklers) would cause unacceptable collateral damage.
Operating Environment: Indoor (standard): -10 to 50 deg C, 5-95% RH (non-condensing). Cylinder storage: cylinders should be stored at 0 to 50 deg C (the cylinder pressure varies with temperature — the system is designed to operate at design concentration across this full temperature range with temperature compensation). Outdoor / extreme environment: available with weatherproof enclosures (IP65/IP66 rated), cylinder heating (for sub-zero environments), and sun shields (for desert environments). ATEX/IECEx certified components available for hazardous area installations (Zone 1/2, Zone 21/22).
Warranty: 5 years manufacturer warranty against material and workmanship defects under normal use. Cylinder warranty: 10 years from date of manufacture (cylinder hydrostatic test interval per national pressure vessel regulations). Extended warranty available for volume orders and service contracts.
Expected System Life: 20+ years (cylinders, piping, nozzles — with periodic inspection and hydrostatic testing per national pressure vessel regulations), 10-15 years (control panel and detection equipment — electronic components), 5-10 years (detectors — optical smoke detectors require periodic replacement as the sensing chamber accumulates contamination). FK-5-1-12 agent: indefinite shelf life (the agent is chemically stable — does not degrade over time. Unlike dry chemical powder which cakes and requires replacement every 5-6 years, FK-5-1-12 remains effective indefinitely as long as the cylinder remains sealed and pressurized).
Selecting the right FK-5-1-12 fire suppression manufacturing partner is a decision that affects asset protection, regulatory compliance, and business profitability. A fire suppression system must be certified (UL/FM/CE/VdS), reliable (it must discharge when needed — during a fire, there is no second chance), and compliant (meeting the specific requirements of NFPA 2001, ISO 14520, and local fire codes). Wanlin Fire Control is trusted by distributors in 30+ countries as their FK-5-1-12 manufacturing partner because:
✓ Genuine FK-5-1-12 System Manufacturer: We own and operate our ISO9001:2015 certified factory with in-house cylinder manufacturing, system assembly, agent filling, and complete functional testing. When you ask about NFPA 2001 hydraulic calculations, enclosure integrity requirements, or nozzle placement optimization — you get answers from the engineers who designed the system.
✓ Complete International Certification: UL Listed (UL 2166/UL 2129), FM Approved (FM 5600), CE Marked (PED/CPR), VdS Approved, LPCB Approved, DNV Type Approved, IMO compliant, NFPA 2001, ISO 14520 — full test reports from ISO 17025 accredited laboratories provided with every system for customs clearance and local regulatory approval.
✓ Full Product Portfolio: Cabinet-type systems (40L-180L), engineered piping network systems, detection tube (FDT) systems, suspended units, rack-mounted units, portable and wheeled extinguishers, skid-mounted systems, and non-pressurized systems. One manufacturer — complete FK-5-1-12 fire suppression solution.
✓ Factory-Direct Pricing: 40-60% cost advantage vs. major international fire suppression brands — because you buy direct from the manufacturer, not through a multi-layer distribution chain.
✓ OEM/ODM Flexibility: From 10-unit logo branding to 100+ unit private-label product lines with custom control panels and documentation — we build your fire suppression brand.
✓ Engineering Support: Complete system design service — you provide room dimensions, and our engineers deliver: agent quantity calculations, cylinder selection, nozzle placement, pipe routing drawings, and full hydraulic calculations — ready for customer submission.
The Clean Agent System Installation offers distinct competitive advantages for international distributors, system integrators, and B2B buyers:
1. FK-5-1-12 — The Future-Proof Clean Agent: GWP=1, ODP=0, exempt from HFC phase-down. Unlike FM-200 systems facing regulatory restrictions, FK-5-1-12 has no phase-down risk — protecting your customers' investment for the system's 20+ year service life.
2. Safe for Occupied Spaces: NOAEL=10% vs. typical design concentration of 4.2-5.9% — 1.7x safety margin. Safer than CO2 systems (lethal at fire-extinguishing concentrations) and Inergen (reduces oxygen — potential asphyxiation risk).
3. Zero Damage to Protected Assets: No residue, no water, no corrosive powder. After discharge: ventilate for 30-60 minutes, and the protected space returns to normal operation — equipment undamaged, documents dry, artifacts preserved.
4. UL/FM/CE/VdS Certified: Tested to the world's most demanding fire suppression standards by ISO 17025 accredited laboratories. Complete certification documentation provided — essential for customer regulatory approval and insurance acceptance.
5. Complete System Portfolio: Cabinet, piping network, detection tube, suspended, rack-mounted, portable, wheeled — one manufacturer for all FK-5-1-12 configurations. Simplified procurement and consistent quality across the entire system.
6. Factory-Direct Partnership Model: Your brand on certified fire suppression systems. Your pricing, your customer relationships, your market. We manufacture — you own the business.
Value Comparison: The Clean Agent System Installation from Wanlin delivers UL/FM/CE/VdS certified FK-5-1-12 fire suppression at 40-60% below the system cost of equivalent solutions from major international fire suppression brands (Johnson Controls/Tyco, Kidde/Carrier, Fike, Janus, Sevo Systems). The cost advantage comes from Wanlin's direct-manufacturer model — we own our ISO9001 factory where we manufacture cylinders, assemble systems, fill FK-5-1-12 agent, and perform complete system testing. No multi-layer distribution, no brand marketing overhead, no corporate overhead — just certified fire suppression at factory-direct pricing. For distributors: higher margins (40-50% vs. 20-30% for major brands), competitive pricing that wins more projects, and a direct relationship with the engineering team that designs and builds every system.
Whether you are a distributor evaluating FK-5-1-12 product lines, a system integrator designing fire suppression for a data center or BESS project, a government procurement officer planning fire protection for public infrastructure, or a facility manager protecting high-value assets — these answers address the most common questions from international buyers considering Wanlin Fire Control as their FK-5-1-12 Clean Agent System Installation manufacturing partner.
Wanlin Fire Control is a genuine fire suppression equipment manufacturer — not a trading company. We own and operate our ISO9001:2015 certified production facility with complete in-house capabilities: cylinder manufacturing (agent storage cylinders produced in our certified pressure vessel workshop — seamless steel cylinders per DOT/TPED/PED standards, with automated welding, hydrostatic testing, and X-ray inspection), system assembly and integration (cabinet systems, piping network systems, and modular systems fully assembled and function-tested at our factory before shipping), control panel manufacturing (UL/FM/CE listed fire suppression control panels designed, assembled, and programmed in-house — not sourced from a third party), and agent filling (FK-5-1-12 agent filling station with precision mass flow metering — each cylinder is filled to exact specification and the fill weight is recorded with the cylinder serial number for traceability). As a direct manufacturer, we provide: (1) Factory-direct pricing — typically 30-50% savings versus sourcing through trading companies or established international fire suppression brands. (2) Genuine engineering expertise — when you ask about NFPA 2001 hydraulic calculations, enclosure integrity testing, nozzle placement optimization, or cylinder manifold balancing, you get answers from the engineers who design and build these systems — not a salesperson. (3) Consistent quality — because we control the entire production chain (from cylinder manufacturing to agent filling to system testing), quality is engineered in, not inspected in. (4) OEM/ODM capability — from custom-branded cabinet systems to full private-label product lines, we build your fire suppression brand. When you source FK-5-1-12 systems from Wanlin, you communicate directly with the factory that designs, manufactures, and tests every system. That means faster technical support, more accurate quotations, and a true partnership — not just a transaction.
Our pricing structure supports partners at every scale: (A) Evaluation/testing: 1-3 units across different system types — pay sample cost + shipping, fully credited against your first bulk order. Recommended: one cabinet-type system for a typical server room application, one portable FK-5-1-12 extinguisher, and one control panel — this combination lets you demonstrate the complete fire suppression solution to potential customers. (B) Small project / trial order: 3-10 systems — suitable for a pilot project (e.g., equipping 5 server rooms in a single building), a small distributor testing the market, or a system integrator's first deployment. (C) Standard distributor: 10-50 systems — typical first order for a new regional distributor establishing a product line. This volume qualifies for distributor pricing, technical training, and marketing material support. (D) Volume distributor: 50-200 systems — for established distributors with consistent demand. Includes dedicated account manager and priority production scheduling. (E) Strategic partner: 200+ systems or multi-year framework agreement — exclusive territory rights, private label manufacturing, dedicated production capacity, co-development of custom system configurations. Pricing decreases significantly with volume — each tier typically offers 8-15% price reduction versus the previous tier. We also offer new partner introductory pricing, volume rebate programs, and co-marketing support. Contact our export team for a detailed quotation.
Absolutely. OEM/ODM is a core part of our business model. We understand that international distributors and fire protection companies want to build their own brand. Full OEM/ODM options: (1) Branding — your company logo and brand name on: the system cabinet (silk-screen or laser engraved), the cylinder label and nameplate (custom label design with your brand, certification marks, and technical data), the control panel (custom fascia with your logo and color scheme), the portable extinguisher (custom label wrap — full-color printing), packaging (retail box, industrial crate, project-specific packaging), and documentation (user manual, installation guide, maintenance manual — with your company name and contact information). (2) Custom product configuration — specify cylinder sizes, nozzle types, control panel features, and detection systems to match your target market's standard configurations. (3) Custom firmware — control panel interface language (20+ languages), alarm sequences (country-specific patterns), communication protocols (BACnet, Modbus, KNX — for integration with regional building management standards). (4) White-label engineering — we provide the complete engineering design package (hydraulic calculation, pipe and nozzle schedule, installation drawings) under your company letterhead. (5) White-label monitoring — remote system monitoring via your branded cloud platform (API integration). Typical MOQ for OEM: 10 units for logo branding on standard systems, 50 units for custom packaging and full branding, 100+ units for private-label product line with custom control panel interface and documentation.
Our FK-5-1-12 systems are designed, tested, and certified to the world's leading fire suppression standards: United States/Canada — UL Listed per UL 2166 (Halocarbon Clean Agent Extinguishing System Units) and UL 2129 (Halocarbon Clean Agent Fire Extinguishers), FM Approved per FM 5600 (Clean Agent Extinguishing Systems), FCC Part 15 (control panel radio emissions). European Union — CE Marked per Pressure Equipment Directive (PED) 2014/68/EU (cylinders), Construction Products Regulation (CPR) for fire protection products, EN 15004 (Gas Extinguishing Systems), EN 12094 (Components for Gas Extinguishing Systems). United Kingdom — UKCA Marking (post-Brexit), LPCB Approved per LPS 1204/LPS 1230. Germany — VdS Approved (VdS 2380, VdS 2381, VdS 2493). Middle East — SASO (Saudi Arabia), ESMA/ADQ (UAE Civil Defence), various Gulf Conformity Mark requirements. Australia/New Zealand — AS 4214 (Gaseous Fire-Extinguishing Systems). Marine — DNV Type Approved, MED (Marine Equipment Directive) Wheelmark, IMO MSC/Circ.848 compliant. China — CCCF Certified (compulsory fire product certification). Complete test reports from ISO 17025 accredited laboratories (UL, FM, TUV, SGS, Intertek, Bureau Veritas) provided with every system. For markets requiring country-specific certification not already held, we provide: complete test reports for local certification body review, product samples for local testing, and factory audit hosting.
Complete export logistics management: (A) Shipping options: Sea freight (FCL/LCL) — 25-45 days port-to-port, most economical for cabinet-type and piping network systems (heavy, large volume). Air freight — 5-10 days, suitable for portable/wheeled extinguishers, control panels, and urgent orders. Express courier (DHL/FedEx/UPS/TNT) — 3-7 days, for samples, portable extinguishers (limited to 2-3 units due to weight). China-Europe Railway Express — 15-20 days, cost-effective alternative to sea freight for European destinations. (B) Export documentation: commercial invoice, packing list, certificate of origin, CE/UL/FM test reports and certificates, Declaration of Conformity per EU directives, Safety Data Sheet (SDS) for FK-5-1-12 agent, Bill of Lading (sea) / Airway Bill (air), fumigation certificate (ISPM 15 for wooden packaging), and country-specific certification documents. (C) Dangerous goods: FK-5-1-12 agent is classified as UN 3164 (Articles, Pressurized, Pneumatic or Hydraulic) for pressurized systems, or non-hazardous for non-pressurized configurations. We provide complete Dangerous Goods documentation including: MSDS, UN specification packaging certification, and IMO/ICAO/IATA dangerous goods declaration. All documentation prepared within 24 hours of shipment. Our trade compliance team assists with HS code classification and customs clearance guidance for every destination country.
Standard payment terms: (A) New customers: 30% T/T deposit to confirm order and begin production, 70% balance before shipment — we provide photos and videos of completed systems and test reports for your approval before requesting final payment. (B) Established partners (3+ successful orders): flexible terms including 50% deposit / 50% against scanned shipping documents, or Net-30/Net-60 open account (subject to credit approval). (C) Large strategic orders: negotiable — we work with our bank and your bank to structure mutually acceptable payment terms, including: L/C at sight from major international banks (UCP 600 terms — we review your draft L/C before issuance to avoid amendments), and staged payments tied to project milestones (engineering approval, system assembly completion, factory acceptance test, shipment, site commissioning). (D) Sample/evaluation orders (under $5000): 100% advance T/T or Western Union. Payment methods: T/T bank transfer (SWIFT code provided with proforma invoice), L/C at sight, Western Union (sample orders only). For first-time buyers: we accept Alibaba Trade Assurance for added buyer protection. All payments to our verified corporate bank account — bank details and company registration documents provided with quotation.
Production timelines: (A) Stock systems (maintained inventory of popular cabinet sizes — 40L, 70L, 90L, 120L, 150L, and portable extinguishers): 5-10 business days for up to 5 units. (B) Standard production: 15-25 business days for 5-30 systems (cabinet assembly, cylinder filling, control panel assembly, system integration testing). (C) Engineered piping network systems: 30-45 business days for custom hydraulic calculation, pipe routing design, component procurement, and assembly. (D) OEM with custom branding: 25-35 business days for custom-labeled cabinets, cylinders, panels, and packaging. (E) Full OEM with white-label control panel: 45-60 business days for custom control panel firmware, interface, and documentation. (F) Rush production: 20-30% surcharge for priority scheduling — subject to factory capacity. Our factory operates year-round with buffer stock of critical components (cylinders, valve assemblies, control panels, FK-5-1-12 agent) to minimize supply chain disruption. Lead times confirmed at order placement and contractually committed. We communicate proactively about any schedule changes.
Quality is life-critical for fire suppression — a system that fails to discharge during a fire means total loss of the protected assets, and potentially loss of life. Our ISO9001:2015 quality system includes: (1) Incoming material inspection — all components inspected on receipt: cylinder steel (material certification, ultrasonic thickness measurement, weld X-ray), valve components (material certification, dimensional inspection, leak test), FK-5-1-12 agent (purity certification per ISO 14520 — minimum 99.0% purity, acid content, water content, non-volatile residue), control panel components (PCB visual inspection, component authenticity verification). (2) In-process QC — cylinder manufacturing: automated welding (robotic MIG/TIG with real-time parameter monitoring), hydrostatic testing (every cylinder tested at 1.5x maximum allowable working pressure per national pressure vessel code), pneumatic leak test (every cylinder pressurized with nitrogen and submerged in water — zero bubbles = zero leaks). (3) System assembly QC — pipe fit-up inspection (weld gap, alignment), pressure testing of assembled pipe network (1.5x design pressure, 30-minute hold), cabinet assembly (dimension check, door alignment, paint finish inspection), control panel functional testing (every input/output verified, every alarm sequence tested, communication protocol verified). (4) 100% Functional testing — every system (not sample testing): cylinder agent fill weight verification (precision scale, recorded with cylinder serial number), valve actuation test (electric and manual), control panel full functional test, system integration test (detector to panel to actuator — complete end-to-end test), and discharge simulation (pneumatic test to verify discharge time and agent distribution — conducted on a sample basis per production batch). (5) Certification testing — third-party witnessed testing by UL/FM/CE notified body inspectors for certified product lines.
Wanlin Fire Control's FK-5-1-12 perfluorohexanone fire suppression systems have proven their effectiveness across diverse markets and deployment scenarios worldwide:
✓ US Utility-Scale BESS Project — 500+ FK-5-1-12 Systems for Battery Containers (United States): A US utility-scale battery energy storage developer (Texas, 500MW/1000MWh total capacity, 200+ battery containers) deployed Wanlin FK-5-1-12 detection tube systems for fire protection in every battery container. The project was driven by: (1) insurance requirements — the project insurer mandated FK-5-1-12 or equivalent clean agent fire suppression in every container as a condition of coverage, (2) UL 9540A large-scale fire testing — the battery manufacturer's UL 9540A test data validated FK-5-1-12 as an effective suppression agent for the specific battery chemistry, and (3) UL listed systems — FM Approved FK-5-1-12 detection tube units met the insurer's certification requirements. Each 40-foot battery container received: 1 detection tube system (6kg FK-5-1-12, direct release — tube routed at module level through all racks), 1 smoke detector for supplementary detection, and remote monitoring via the container's SCADA system (Modbus RTU from the suppression control unit). The detection tube configuration was selected for: fastest possible response (tube rupture and discharge within 3-5 seconds of fire — vs. 10-20 seconds for smoke detector-based systems), no external power required (the detection tube system is purely pneumatic — no electrical power in the battery container, eliminating a potential ignition source), and minimal space (the compact cylinder mounts inside the container without reducing battery capacity). The systems have been operational for 2 years with 2 tube rupture/discharge events (both real thermal runaway incidents, both suppressed successfully — fire contained to a single module, no propagation to adjacent modules or containers).
✓ Nigerian Oil & Gas Offshore Platform — ATEX FK-5-1-12 Suppression (Nigeria): A Nigerian offshore oil production platform (Niger Delta) deployed Wanlin ATEX/IECEx certified FK-5-1-12 cabinet systems for fire protection in the platform's electrical switchgear rooms, control room, and analyzer shelters. The offshore environment presents extreme challenges: corrosive salt atmosphere, continuous vibration from machinery, limited space (every square meter is premium), and critical reliability (a fire that disables the control room means production shutdown and potentially a catastrophic incident). FK-5-1-12 was selected because: safe for continuously occupied spaces (the control room is manned 24/7), electrically non-conductive (safe on energized switchgear and control panels), and ATEX Zone 2 certified components ensure the system itself does not introduce an ignition source. The systems were installed during a scheduled 2-week platform maintenance shutdown. The platform's safety case (the regulatory document demonstrating that risks are managed to ALARP — As Low As Reasonably Practicable) was updated to reference the FK-5-1-12 systems, and the installation was approved by the Department of Petroleum Resources (DPR) and the platform's classification society (DNV).
✓ Australian Wind Farm — FK-5-1-12 for Turbine Nacelle Protection (Australia): An Australian wind farm operator (Victoria, 100+ turbines, 200MW total capacity) deployed Wanlin FK-5-1-12 detection tube systems for fire protection in wind turbine nacelles. Wind turbine nacelles are unique fire risks: enclosed space 80-100 meters above ground containing high-voltage electrical equipment, hydraulic systems with flammable oil, and mechanical components that can overheat. A nacelle fire typically results in total loss of the turbine (the nacelle burns and falls) — replacement cost $2-4 million per turbine plus 6-12 months of lost generation revenue. The detection tube system was selected because: (A) the nacelle is unmanned — electrical fire detection would require power, battery backup, and communication to a remote monitoring center. The pneumatic detection tube requires none of this — it detects fire and discharges agent completely autonomously, (B) the tube is routed around the generator, gearbox, transformer, and hydraulic power unit — the most likely fire sources, (C) the compact cylinder (6kg FK-5-1-12) fits in the limited nacelle space, and (D) the system works regardless of whether the turbine is generating (grid-connected) or shut down — no dependence on electrical power. Installation: the cylinder and tube were installed during a scheduled maintenance climb (turbine shut down for 4 hours per unit). The tube is routed at ceiling level through the nacelle, secured with cable ties to existing cable trays — no structural modification. The operator has had 1 nacelle fire since installation: a generator bearing failure caused overheating that ignited hydraulic oil. The detection tube ruptured within 8 seconds of the fire starting, discharged the agent into the nacelle, and extinguished the fire. The turbine sustained minor damage to the generator bearing housing (replaced during scheduled maintenance) — vs. a total loss without the suppression system. Return on investment for the 100-turbine deployment: a single nacelle fire prevented = $2-4 million saved — far exceeding the cost of equipping all 100 turbines with FK-5-1-12 systems.
Wanlin Fire Control structures partnerships around your business model and market objectives:
Brand Distributor: Purchase Wanlin-branded Clean Agent System Installation at distributor pricing with protected territory rights. Build the Wanlin brand in your market with our certification documentation, marketing materials, engineering support, and technical training.
OEM / Private Label Partner: We manufacture the Clean Agent System Installation to your specifications — your brand name on certified fire suppression systems, your control panel branding, your documentation, your packaging. MOQ from 10 units for logo branding, 50+ for white-label product line.
System Integrator Partner: Integrate Wanlin FK-5-1-12 systems into your fire protection solutions for data centers, BESS, industrial facilities, or marine applications. Our engineering team provides system design, hydraulic calculation, and installation support.
Government / Infrastructure Partner: Supply Wanlin FK-5-1-12 systems for public infrastructure fire protection — museums, archives, government data centers, public hospitals, transit infrastructure. Complete tender documentation, competitive government pricing, and large-scale deployment support.
Data Center / BESS Partner: Provide FK-5-1-12 fire suppression as part of your data center or BESS turnkey solution. Wanlin provides the certified fire suppression — you provide the complete infrastructure package.
Engineering / Design Partner: Your fire protection engineering firm specifies Wanlin FK-5-1-12 systems in your designs. We provide complete engineering support: system sizing, hydraulic calculations, BIM/CAD files, and specification compliance documentation.
We are actively seeking: Regional exclusive distributors for FK-5-1-12 fire suppression systems, fire protection equipment importers and wholesalers, fire suppression system integrators and installers, data center and BESS equipment suppliers, and government and institutional procurement partners.
The global fire protection industry is undergoing its most significant technology transition in a generation — from ozone-depleting Halon (banned), to high-GWP HFCs (being phased down), to environmentally sustainable, high-performance clean agents. FK-5-1-12 perfluorohexanone is the clean agent that meets all the requirements of modern fire protection: effective fire suppression across Class A, B, and C fires, safe for people in occupied spaces, zero damage to protected assets (no residue, no water, no corrosion), zero harm to the environment (GWP=1, ODP=0, 5-day atmospheric lifetime), compliant with the strictest environmental regulations (exempt from HFC phase-down), and certified to the world's most demanding fire suppression standards (UL, FM, CE, VdS, LPCB).
The Clean Agent System Installation from Wanlin Fire Control is a professionally certified, globally deployable FK-5-1-12 fire suppression system manufactured by a company that understands fire protection at the engineering level. As a direct manufacturer, Wanlin offers a partnership model that empowers distributors and system integrators: you control your brand, your pricing, and your market — we provide the certified products, the engineering support, and the manufacturing capability to make your vision a reality.
Whether you are a distributor seeking a competitive FK-5-1-12 product line with industry-leading margins, a system integrator designing fire suppression for a hyperscale data center or utility-scale BESS, a government agency protecting national heritage and public infrastructure, or a facility manager safeguarding high-value assets — Wanlin Fire Control has the certified products, engineering expertise, and partnership commitment to support your objectives.
Contact our export team today to request evaluation samples and discuss volume pricing for your project or distribution channel.
Wanlin Fire Control — Your Direct Source Factory for Certified FK-5-1-12 Perfluorohexanone Clean Agent Fire Suppression Systems. ISO9001:2015 Certified | UL Listed / FM Approved / CE Marked / VdS Approved / LPCB Approved | NFPA 2001 / ISO 14520 / EN 15004 Compliant | Global Shipping & Export Documentation Support. Partner with the manufacturer — not a middleman. We welcome inquiries from fire protection distributors, system integrators, data center and BESS solution providers, fire protection engineering firms, government procurement agencies, and facility owners worldwide. Protect what matters — with FK-5-1-12 clean agent fire suppression, manufactured for reliability, certified for confidence, and priced for your business success.